TEA.TOYS — Shared detail and dimension coupon
Bambu Lab H2D Pro · nozzle 0.2 mm · SUNLU PLA BASIC Grey
UNCALIBRATED — no physical measurements or print trials have been performed.

Open *__editable.3mf in Bambu Studio 02.08.02.61 to edit the project.
The .gcode.3mf is an actual sliced job for this exact printer/nozzle combination.
It must not be used with a different printer or nozzle.
Dimensions: 60 × 35 × 12 mm. Scale 100%. Flat 2 mm base placed on the bed.
Seven positive ribs and seven blind slots, left to right:
0.2, 0.3, 0.4, 0.5, 0.6, 0.8, 1 mm. The tall square block is on the right.
Ribs rise 2 mm above the base. Blind slots are 1 mm deep.
The square block rises 10 mm above the base.

Plate: Textured PEI. Nozzle/bed: 210/60 C, starting values only.
Room target: 25 C; measured conditions have not been recorded.
Layer height: 0.08 mm. Wall generator: classic.
The diagnostic process differs from the figure profile only by supports off,
no brim and brim width 0, plus the documented process identifiers/difference mask.
Other printing settings remain inherited from that exact parent profile.
Figure profile SHA256: fc51d0882c16e6e5e9d59bc5102e39164e803c55be87b41f3f882f4fda3977da
Diagnostic profile SHA256: 66e71eae2785a860be9c4e923d9613aa70e9b15792470a1e356b72b40717c17d
Slicer estimate: 3972.121 seconds, 4.4396 g.
These are estimates, not measured production results.

Actual G-code observations (nominal dimensions, not measurements of a print):
0.2 mm: rib present; nominal deposited width 0.1977 mm; nominal slot clearance 0.2000 mm.
0.3 mm: rib present; nominal deposited width 0.2997 mm; nominal slot clearance 0.3000 mm.
0.4 mm: rib present; nominal deposited width 0.4000 mm; nominal slot clearance 0.4000 mm.
0.5 mm: rib present; nominal deposited width 0.5000 mm; nominal slot clearance 0.5000 mm.
0.6 mm: rib present; nominal deposited width 0.6000 mm; nominal slot clearance 0.6000 mm.
0.8 mm: rib present; nominal deposited width 0.8000 mm; nominal slot clearance 0.8000 mm.
1 mm: rib present; nominal deposited width 1.0000 mm; nominal slot clearance 1.0000 mm.

The width estimate uses recorded LINE_WIDTH and nominal circular bead geometry.
It is not a plastic-flow simulation. A visible G-code slot may close in a print.
With a 0.4 mm nozzle, Arachne may widen the thinnest ribs; compare the numbers
above instead of expecting every nominal rib width to be reproduced literally.

After physical printing and cooling, fill the blank MEASUREMENTS.csv. Record date,
printer identity, nozzle, spool/batch and condition, room temperature, plate,
instrument and its resolution, cooling state and photographs. Inspect rib survival
and slot opening separately from dimensions. Enter three actual measurements
where the instrument allows; never copy nominal values into the actual columns.
Photograph top and side with a ruler. State how very narrow slots were observed;
do not claim resolution that the instrument cannot provide.

This coupon compares detail reproduction and dimensions. It does not calibrate
flow ratio, pressure advance/K or temperature. Do not infer a global scale
correction from one coupon. Results do not transfer automatically between
printers, nozzles, spools or settings. After changes, slice and inspect again.
The first planned physical studio trial is A1 mini with a 0.4 mm nozzle.
Digital numerical and independent visual checks passed. No printer job was sent.
Physical printing release has not been granted by this package.

Editable SHA256: 6f571cc3d05a553f4116e6bec203d84859679fec668a4ce42ca6e19b2efb63c5
Sliced SHA256: c5e7b288f1fd8bd533dbe49ca85c5bc9f48244afd1aeb4ca5c3d8bedbc857551
Only non-commercial use: personal printing, learning and experimentation.
Selling files or prints requires separate permission.
Только некоммерческое использование: личная печать, обучение и эксперименты.
Продажа файлов и отпечатков требует отдельного разрешения.
